BX-1 10-Rd Factory Magazines
Factory Ruger 10-Round magazines to replace old, worn, or dirty magazines. Defective magazines are frequently a cause of feeding and jamming problems at the breech. The rotary springs weaken over time and will not feed the last five rounds properly. Keep them clean and unloaded when not in use and they will last longer.
£15.00each
New 40th Anniversary Clear BX-1 Magazines
Made in honor of Bill Ruger's 40th Anniversary in the firearms industry.
£16.00each
OUT OF STOCK
New Eagle Quick Release 10-Rd Magazines
EAGLE Quick Release magazines are good quality magazines, economically priced. They feature a straight stainless steel coiled spring that provides continuous smooth compression for reliable cartridge feeding. It has a cleanout Door on the bottom of the magazine that permits internal cleaning of the magazine. Another nice feature is the built-in clip that lets you carry two (2) magazines at the same time. Plus the translucent LEXAN magazine allow you to verify rounds in the clip - a good safety feature. See photo above. This magazine design is very easy to remove from the magazine bay of your Ruger 10/22, 77/22, and 96/22. Depress the magazine release and pull the short banana mag straight out. No need to have an extended magazine release
£6.50 each
OUT OF STOCK
The Extended Bolt Handle is extended .25" for faster, easier operation
and the recoil rod is polished, hardened and then TIN Coated. This finish
is not only extremely hard but also contains lubricating features to
create an extremely smooth operating guide rod. The coated recoil rod
reduces friction which improves both feeding and ejecting. A recoil
rod spring is also included. The spring has been cryogenically treated
to withstand years of use.
£35.00
Stainless Steel Muzzle Break LR or WMR
stainless steel muzzle break designed for easy installation on your
Ruger 10/22 LR or WMR barrel. Installs without any special tools and
without any fitting work. Hex head wrench and set screw included. Used
to supress muzzle jump and helps provided a fuller powder burn. Beautifully
finished to match your stainless steel factory tapered barrel.
£20.00
Silver O/No RU006
Black O/No RU007
Lever-Style Ext. Magazine Release Ruger 10/22
Extended magazine release for Ruger 10/22 LR and Magnum. Steel and aluminum construction. This is a quick release mechanism factory replacement of the standard Ruger release. Easy drop-in installation for the Ruger 10/22 trigger assembly.
( Black or silver )£9.00
Black - O/No RU009
Silver - O/No RU010
1-Piece Weaver-Style Base Ruger 10/22
( Black )
Replace your original dovetail mount and allow yourself to use weaver scope mounts with this, Millet one piece alloy weaver base mount, comes with mounting screws and allen key.
£10.00
O/No RU011
1-Piece Weaver-Style Base Ruger 10/22
( Silver )
Replace your original dovetail mount and allow yourself to use weaver scope mounts with this, Millet one piece alloy weaver base mount, comes with mounting screws and allen key.
£10.00
O/No RU012
Genuine Ruger 10/22 1-Piece Weaver-Style Base
( Black or silver)
Replace your original dovetail mount and allow yourself to use weaver scope mounts with this, Ruger one piece alloy weaver base mount, comes with mounting screws .
£11.00
Black O/No RU013
Silver O/No RU014
Hornet Custom Recoil Bolt Buffer
Solid white Teflon® bolt buffer replaces the standard factory steel pin (Ruger Part #B-48) located at the rear of the receiver. Eliminates annoying bolt cycling noise during shooting when the bolt slams into the factory stop pin - also reduces impact stresses on the receiver. Easy installation, no special tools required. Drift-in from right side-to-left.
£6.00
OUT OF STOCK
Two Ruger 10/22 Receiver Pins
(2) Receiver to Trigger Assembly Steel Pins, Ruger Part No: B-5. Size: (2) .0186" x 1.250"
£4.00
Here is an aftermarket part that will improve the handling characteristics of your Ruger 10/22 LR. The automatic bolt release eliminates the two-handed manipulation of the cocking handle and bolt release to operate the bolt lock. Simply pull the bolt handle back and release - the bolt is now unlocked.
£14.00
New Muzzlite BullPup Conversion Stock Ruger 10/22 LR
This is the popular BullPup stock conversion for the Ruger 10/22 LR. It is made of two halves split down the center of the stock. Integral hooded front sight and rear sight mounted in the carry handle. Your Action and Barrel assembly drops inside, and a trigger transfer bar links the new forward trigger to the trigger action. The stock halves are fastened with eight (8) mounting screws furnished in the kit. The action is located at the back of the stock allowing a much shorter overall firearm length. The magazine well and magazine release access is unaffected, and the safety is easily accessible. This makes a compact rimfire carry rifle for backpackers that stores easily. Durable compact construction, but it is not water resistant. Trigger mechanism requires minor adjustment of the action fit in the stock for best results. Kit includes stock, fasteners, strap, and scope mount.
Rifle not included!
£90.00
Direct from supplier
Dragunov Polymer Stock
Made by Choate, this is a lightweight and rugged hunting stock that is designed for comfortable shooting. Impervious to weather and rain. Never changes dimensions in bad weather or humidity. It's practically indestructible making it ideal for field use. No fitting required. Ergonomically, it is a fast-handling stock, and comb placement is ideal for use of a scope. Features 1" sling swivels, barrel clip-on hand guard, rubber butt pad, and a 1911-style grip angle for a pistol-like trigger pull. Capable of mounting a Bipod using the front swivel sling stud. This is a very versatile stock that is a natural for hunting small game with the Ruger 10/22.For use with "standard" sporter barrel profiles and will not fit .920" bull barrels.
Rifle not included!
£70.00
Direct from supplier